Showing posts with label bags. Show all posts
Showing posts with label bags. Show all posts

Sunday, June 3, 2012

Lunchtime "Paper Bag" from Fat Quarters


I travel around a lot for work -- which means I seldom get to bring my lunch to work.  Most of the time, I'd rather have a cheese sandwich from home than whatever I have to grab at a company cafeteria.

For those times when I can bring a sandwich, I normally carry a little brown paper bag.  This got me thinking -- instead of a tossable paper bag, why not make a washable cloth "paper bag like" bag?

The plan -- use some fat quarters that I had lying around.  Each quarter is one-fourth of a yard of fabric -- 18 inches by 22 inches.  Here's what I wanted to make.

No fancy plans -- just follow what a paper bag looks like ... just make it from fabric instead!

Even though a single fat quarter is plenty for the bag, I decided to use two pieces -- this lets me have different colors for the front/back and the two sides.  I decided to use French Seams to finish the edges -- but I thought I'd put the bound edge on the outside, rather than the inside.  Thought it might give it a slightly different look.

So -- I grabbed two fat quarter pieces in contrasting colors.  I originally bought these at a 99 cent special -- but two pieces have plenty of fabric to make at least three or maybe four bags.





I wanted to keep the proportions about the same as a small lunch-size paper bag.  I figured the width of the front to be about six inches -- and the width of the sides around 4 inches.  I didn't do any fancy measuring, just eyeballed things until they looked right.

I began with the front/back piece -- I wanted two pieces about 18 inches by 6 inches.  So, I measured off about six inches, made a slight cut, then tore the fabric across for my first piece.  I then did the same thing to cut by second piece.


These two pieces will be my front and back sides of the "paper bag".  I'm going to join them together to make a single 36 inch by 6 inch piece.  I didn't want a pokey seam at the join -- wanted something flatter -- so I used a flat-fell seam to join the pieces.

You can see my two pieces aren't the same width -- that's what happens when you eyeball instead of measuring!  No problem, I'll just trim the extra wide piece so that both pieces match.






After trimming, I folded the piece in half with the flat-fell seam at the fold.  This fold will end out being the middle of the bottom part of the bag.

If I made the bag with this piece as-is, I'd have a really, really TALL bag!







I want to keep the proportions similar to a folded brown paper bag (hey, it's a proven design), so the next step is to trim the piece a little smaller.

Again using the "eyeball" method, I cut about three inches off the "top".




Time for the contrasting color sides.  My plan is to have the flat bottom of the bag be the fold of the front/back piece.

I want the bag to be about four inches wide on the side.

So, I lined up my contrasting fabric at the "top" of my bag and cut an 8 inch wide piece that ended about 2 inches from the bottom seam of the bag.






I then cut this side piece in half, giving me two pieces each about 4 inches wide and about two inches shorter than half the front/back piece.






Now, the "tricky" part.

Normally when you do French Seams, you begin with wrong sides matched.  Since I want the seam on the outside of the bag, we're going to begin with good sides matched.

Open up the front/back piece and lay it so the good side is facing up.  Line up the good side of a side piece so that the middle hits the flat-fell seam of the front/back piece.  The two pieces will make sort of a "T" shape.  Line up and pin the edges.

Time to start sewing.  Begin at one edge of the side piece.  Using a 1/4" seam allowance, sew along the base of the side piece.

When you get to the edge, lower your needle to make a "pivot" point.

Now, raise your presser foot. Drag the side piece along so that the side matches up with the side of the front/back piece (The side piece used to point to 9 o'clock; make it point to 6 o'clock)


Position the "side" of the front/back piece so that it matches up with the edge of your side piece.  Lower the presser foot and resume sewing!

You'll want to be careful you don't bunch up some of the front piece when you do this.

Sew along to the end of the side piece.

When you get there, reposition the piece so that you can sew up the other side of the side piece.



Here's what it looks like when you're done.

You know what comes next -- let's do the same thing with the other side piece.

About the only thing you can have go wrong here is to bunch up the fabric when you make the 90 degree turns at the bottom of the piece.




Try to keep about a 1/4 inch seam allowance as you sew.

When you're finished with both sides, you'll have a "lunchbag shaped" bag.  The edges will be raggedy ... but we're going to take care of that right now.

First, trim your seam allowance to about 1/8 inch.

Next, invert the bag -- turn it "right-side out".  After you do, the good  sides of the fabric will now be on the outside.

Here's where your personal preferences come into play.  You see how the seams are a little "poofy" right now.  We want them flat before we continue with the French Seam.



If you want perfect French Seams, you'll want to iron these seams flat so that the fold exactly at the edges.

If you're happy with okay French Seams, though (like me), then you can put your finger inside the bag, push along the edges of the seam, and "pinch" the edges flat.





Whichever method you use, the next step is to sew a straight seam along the edges.  Remember, we've got a 1/8 inch raw seam on the inside.  When you sew, use about a 1/4 inch seam allowance again.  This will end up enclosing that raw seam that's on the inside!








Continue along all the edge sides where the two contrasting pieces of fabric meet.  French seams always look a little like "piping" to me.  Normally, you have the enclosed piece on the inside of your piece.  In this case, I've arranged it so that the enclosed "piping-like" piece is on the outside.  No special reason, I just thought it might look neat.







When the French Seam is complete, you're almost done.  We just need to finish the seam along the opening of the bag -- and also add some velcro.










The top of the pieces at the opening of the bag are still raw -- I just inverted the bag and did a simple double fold-over hem along the top

You may have to trim the top edges to make them match before you begin the hem.







When done, invert the bag again.  We now need to attach some velcro.  Since I want to mimic a paper bag -- and since a paper bag will hold a fold where fabric won't -- we need a little help to keep the fold in place.

Velcro will do the trick!  I used a plain-old sticky velcro square.



I folded over the top of the bag once, then positioned a sticky velcro tab in the middle of the fold.  I then placed the matching velcro piece on top, then folded the top over once more.  This gives me a "double-fold" at the top that will remain in place.

After you fold the piece over, push down on it for a moment so the sticky velcro attaches fully.







After it's attached, you can unfold the top to see how the two velcro pieces line up.










And that's it -you're finished.  My bag had plenty of room for a sandwich, a bag of chips, and a small pack of cookies.  If you normally carry more booty for lunch, you might want to alter your bag dimensions to make it a little bigger.

For me, this "mock paper bag" works just right!  If you figure two fat quarters will yield three or four bags, then a full yard (four quarters) will easily give you enough for a week's worth of washable lunch bags!

Sunday, May 20, 2012

Gift Card Bags

We find we're using gift cards more and more come holiday and gift-giving time.  I've been making these little "gift card bags" the last few years -- thought I'd share them since they definitely fall under the "one-yard-or-less" guidelines!

The bags are pretty simple -- the handle can be kind of special if you have a serger with holiday-colored thread for the bag handle.  Or, you could just sew a handle with some ribbon or scrap bias tape.




I like to stock up on holiday fabric -- after holiday season when the prices fall!  Plus -- I found these nice holiday "napkins" for .25 cents each -- bought a bunch of them to cover mantels and such.  They make good gift-bag makings, too.

You can see my Christmas fabric rectangle overlaid on top of my Christmas napkin.  I'll make two bags -- once from each source.

It doesn't take much fabric for a bag -- use a gift card or a credit car for a guideline.  I'm using my Metro bus pass here -- it's about 2 inches high by about 3 1/2 inches wide.  I didn't measure it with a ruler -- I'm just setting it on the fabric to get an idea of how much to cut.  Leave about 3/4 of an inch on each side.  The length should be twice the card's width plus about 2 inches.

After sizing and cutting a rectangle, fold it in half.   Place the card on the fabric near the bottom fold to check the sizing.  Trim the fabric as necessary -- a little too big is good, a little too small is bad!

Again, you want about 3/4 inch on each side of the bag -- and about an inch at the top of the bag (we're going to hem this with a double foldover -- hence the extra.)


Begin by sewing a "hem" on each end of your rectangle.  I used a simple double fold-over and hemmed it down with a straight stitch.

You can see I've already hemmed the left-hand portion of this piece -- I'm hemming the right-hand side right now.





Once done, fold the bag back up -- and sew a straight stitch down each side.  The bottom is already closed because of the fold, so we'll have a "bag" closed on three sides when we're done.



Don't worry about finishing the sides -- we're going to use the serger to both finish and for handles in the next step.

If you're not serging, you can sew some ribbon or some bias tape along the sides (and curve it over the top of the bag for a handle).

If you are serging, begin from the bottom side of the bag and serge up towards the top.  When you get to the top, DO NOT cut off the serging thread like you normally would.





Instead, keep serging -- even after the bag side passes the needles -- so that the thread tail continues to grow.  Then, curve the bag around so that you're serging down the other side of the bag -- going from the top to the bottom.



I've probably made the thread tail a little too long here -- my "handle" looks a little stretched!  Still functional, though!

I made a second bag using my Christmas napkin the same way.  Using a card for size, I cut a rectangle from the napkin, hemmed the tops, sewed the sides, then serged a tail that crossed from one side to the other for a handle.

And -- here are the results!  Use some holiday colored serger thread for more interesting handles (I was too lazy to rethread the serger!)  

Let me know if you give this a try -- I'd like to hear what you think!



Friday, May 4, 2012

Halloween Goodie Bags

We really enjoy holidays at our house -- and Halloween is a big favorite (one year we dressed up a medical skeleton in a tuxedo and sat him at an organ while a recording of Bach's Tocatta and Fugue blared away!  We call him Dr. Feelgood.)

I'm also funny about Halloween treats.  We don't get a whole lot of kids at our house -- so I like to give out good stuff (ie: full-sized candy bars) rather than the bulk bagged things.

The past few years, we've dressed them up a bit -- with little felt Halloween Treat Bags! I size them to fit the full-sized candy bars ... so the size isn't constant; it varies with the kind of candy I find. 


I like to use felt -- you can buy 9 x 12 felt pieces in lots of Holiday colors -- find them on sale and they're 10 for a dollar!  If I were doing a lot of bags (like maybe for a school or a party), then I'd go with a yard of felt.  I put handles on these with scraps of ribbon -- other years I've just hot-glued on pom-poms or scary eyes.Whatever looks like fun!








In this case, I took a 9 x 12 piece and cut it in half length-wise -- to give me two 4.5 inch by 12 inch pieces.










Next, take one side and fold it in half so that you have a doubled piece 4.4 by 5 inches.  Before we sew this, I'm going to use some pinking shears to pink along the unfolded "top".  You don't have to do this -- it's felt, so it's not going to unravel -- but I just think it looks neater.



Now, lets close the sides of the bag; we'll sew a straight stitch down the two "sides" -- AND ALSO along the folded bottom (there's a reason for this).  We're only sewing three sides -- we're leaving the pinked top open.

I used about a 3/8" seam allowance on the sides and about 1/2" on the bottom.





Adding the ribbon handles turned out to be the hard part (as in using up time) -- that's why I don't do it anymore!

Seems like it should be easy -- just take a piece of ribbon 8 about 8 inches long.  Sew one end to the middle of one side of the open top; sew the other end to the middle of the other side.

It should be easy -- but these bags are kinda little and my fingers keep getting in the way!  I ended out having to pin the ribbon down to keep it from slipping -- then I could sew it to tack it in place.  It doesn't have to be a real strong tacking -- you're only carrying a candy bar in this bag after all!



Here's what eight of them looked like. (That's four felt squares cut in half to yield 8 pieces of felt).

This time, I sewed the bags one at a time.  Last year, I placed two 9 x 12 felt pieces together, sewed the bags in place on the 9 x 12 sandwich, then cut out the sewed bags.  I don't know that it really saved me all that much time, though.

I guess it all depends on the size of your candy bars! 







To finish things off, I ran the pinking shears around the remaining three sides of each bag.  That's why we sewed along the folded bottom of the bag earlier!  We're now pinked on all four sides -- which I think makes the bags look "spookier".






And the end result -- here're some bags loaded with full-sized candy bars.  They're all ready for handing out on Halloween.

How do the kids like then?  Well, frankly, I think the kids focus on the candy!  However, their parents really appreciated the bags.  The kids liked them more when I skipped the handles and used glued pom-poms and eyes to make goofy "faces" on the bags.